Project Specifications:

I received this car in pieces.  Originally, the client wanted us to rebuild the stock 6 cylinder engine and install it.  The original engine was unserviceable so the client decided to install a 350 Chevy engine we had.  The project ended up being a complete frame up restoration. 

Cost of project: $29,000.00

Time to complete project: 1.5 years

We did the following:

· Installed the engine we rebuilt (350HP 10:1compression)

· Replaced the entire electrical system with a Painless Wiring kit

· We built a custom gauge cluster with Autometer gauges

· Replaced the entire floor pan, weld in

· Installed a custom 350 THM trans with a 1800 stall converter and shift kit

· Installed a disk brake kit in front

· Installed a Unisteer rack and pinion steering system

· New fuel system with 255 lph Walbro fuel pump

· Weld in Heidts frame tie kit

· Coil over rear springs and 4 link rear suspension

· Rebuilt rear end with Eaton Locker 3.73 ring and pinion, and new axles

· Paint interior of vehicle

· Paint entire undercarriage

· Paint exterior

· Replace interior

· Rebuild rear end with Auburn Locker, Yukon ring and pinion and axles

· Custom stainless steel TIG welded exhaust

· New American Racing wheels and Kuhmo tires

 

 

Phone: 248.677.3299

E-mail:sales@mrxmotors.com

PH: 248.677.3299

Copyright© 2010 MRX Motors.  All rights reserved.